Hiding Your Router (or anything else)

So! You have an ugly router or some other digital device or object that cannot be moved, but that you can’t stand looking at every day. I had this problem recently, so I set about trying to fix it. (Turns out, I found another solution, but I still went through the trouble of making this whole thing, so I want to get credit for it!)

I decided to make a stack of fake books, a la this:

Hide your router.

I’ve seen this picture many times before, but I’ve never seen a tutorial, so I decided to make one!

Step One:

Measure the device that you want to hide (the width, depth, and height are all important) and the space that you want to use to hide it (e.g. the shelf, table, etc. that you are going to place it on).

Step Two:

Obtain some books. I found all of my books at a local antiques store. You can find cheap books anywhere (thrift stores, Goodwill, etc.), but you may have to pay a little more if you want them to look a certain way. (Mine were about $4 each.)

Photo (24)Make sure that they add up to be the correct width to hold your device, keeping in mind that you will lose some width when you deconstruct them. You may also want to think about how they all look together (i.e. maybe you want them all in the same color family, or you want the titles to relate to one another).

Last, it will be helpful to find books with loose bindings, if at all possible. For example, you will want to avoid books like those on the left (pages pretty firmly bound to the spine), and opt more for books like those on the right (I found that pages bound with that thread band on top tend to be looser):

Photo (21)

Or if you find one that’s already kind of coming apart, that’s would be great. This one came apart like buttah:

Photo (23)

Step 3:

Find a cardboard box or some other container that matches the general size of the device that you’re hiding. Make sure everything (your device, your book line-up, and the box) is about the right size.

Step 4:

Cut the pages out of the books. I used a box cutter, you could also use an x-acto knife or something similar. There was really no special trick to this. The hardest part was just going for it and making the first cut (cutting up books definitely feels sacrilegious).

Photo (19) - CopyFor the first and last book of the line-up, you will want to keep the outside book covers as well as the spine. For the books in the middle, you will just want the spines.

Step 5:

Glue the book pieces to the cardboard box. I used craft glue, you could also try a glue gun or rubber cement. This was more of an art than an exact science. Sometimes I put the glue on the book spine itself, but most of the time I put the glue on the cardboard box and just pressed the spines onto it. I also put glue in between the spines to get them to stick to one another. Try not to smash the spine down onto the box too much, because you still want the spine to look puffy like it still has pages inside.

Photo (20)

Photo (22)Step 6:

Let dry. This depends on the type of glue that you use, but I just let mine sit over night.

Step 7:

Place your device inside, and voila!

Photo (19)

 Bonus project!

I got a few really cool looking covers, so at some point I’d like to frame them and just have them up on a wall.

Photo (26)

 

 

Advertisements

4 thoughts on “Hiding Your Router (or anything else)

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s